{{Quickfixn}} Switching between Primary and Backup sessions

[Mike Gatny]

On Fri, Feb 16, 2018 at 3:08 AM, Кононов Роман Олегович <rkononov at bcs.ru>
wrote:
>
> Because it can’t find out value for “SocketConnectHost” (without <n>) in
> configuration, so I configured it like:
>
> [SESSION]
>
> BeginString=FIX.4.4
>
> SocketConnectHost=<Primary>
>
> SocketConnectPort=<Primary>
>
> SocketConnectHost*1*=<Backup>
>
> SocketConnectPort*1*=<Backup>
>

Whoops, you're right, you need to start with the plain SocketConnectHost/
SocketConnectPort.
You should see "Connecting to *<Backup>* on port *<Backup>*" in your events
log when the re-connect happens.
What is your ReconnectInterval setting?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20180216/341d9267/attachment.htm>