{{Quickfixn}} Development Issue.

Thu Sep 17 07:48:03 PDT 2015

I believe TT can provide you with a quickfix dictionary file. It used to be on their dev site.

Francis
__________________________________
Thursday, September 17, 2015, 9:47:10 AM, James wrote:

First thing you should do is go through your provided spec and see if there are any changes from your counterparty for that message type. 

If that doesn't get you anywhere You'll need to provide your data dictionary for the message type in question. 

Sent from my iPhone

On Sep 17, 2015, at 8:34, Kamal Saxena <kamal.saxena at systematixindia.com> wrote:

Hello Team,

I am successfully connect to TT Server (in Back office Mode) 

FIX Application getting successfully "IN/OUT" message in Custom Application Message Windows.
and I loogedin X-Trader and FIX application with same credentials, and creating one order, but my FIX application rejecting with TAG: 371=146. 

What configuration I need to accept order, and view order messages.

I need create this type of message.
Send(09/17/2015-11:58:21.355)|8=FIX.4.2|9=00405|35=8|49=TTDS68BO|56=SYSTEMATIX|50=TTORDDS510001|57=NONE|34=20|52=20150917-11:58:21.354|55=ES|48=00A0LP00ESZ|10455=ESZ5|167=FUT|207=CME|15=USD|1=systematix|47=A|204=0|10553=SYSTEMATIX|18203=CME|16142=IN|18216=A49004_-1|198=5ZXTH|37=0GKFYD002|17=0GKFYD002:0|58=Created from existing|200=201512|151=10|14=0|54=2|40=2|77=O|59=0|11028=Y|150=0|20=0|39=0|442=1|44=194850|38=10|6=0|60=20150917-11:58:21.496|146=0|10=160|
Send(09/17/2015-11:58:21.556)|8=FIX.4.2|9=00505|35=8|49=TTDS68BO|56=SYSTEMATIX|50=TTORDDS510001|57=NONE|34=21|52=20150917-11:58:21.556|55=ES|48=00A0LP00ESZ|10455=ESZ5|167=FUT|207=CME|15=USD|1=systematix|47=A|204=0|10553=SYSTEMATIX|375=CME000A|18203=CME|16142=IN|18216=A49004_-1|198=5ZXTH|37=0GKFYD002|17=1r9384ow6433y|58=Fill|10527=64213:M:140309TN0017423|16018=nusfo0|200=201512|32=10|151=0|14=10|75=20150917|54=2|40=2|77=O|59=0|11028=Y|150=2|20=0|39=2|442=1|44=194850|38=10|31=194850|6=194850|60=20150917-11:58:21.496|6038=20150917-22:28:16.744|146=0|10=235|
Recv(09/17/2015-11:58:21.624)|8=FIX.4.2|9=154|35=3|34=21|49=SYSTEMATIX|50=NONE|52=20150917-11:58:17.026|56=TTDS68BO|57=TTORDDS510001|45=20|58=Tag not defined for this message type|371=146|372=8|373=2|10=075|
Recv(09/17/2015-11:58:21.807)|8=FIX.4.2|9=154|35=3|34=22|49=SYSTEMATIX|50=NONE|52=20150917-11:58:17.209|56=TTDS68BO|57=TTORDDS510001|45=21|58=Tag not defined for this message type|371=146|372=8|373=2|10=080|

Send(09/17/2015-11:59:23.238)|8=FIX.4.2|9=00403|35=8|49=TTDS68BO|56=SYSTEMATIX|50=TTORDDS510001|57=NONE|34=23|52=20150917-11:59:23.238|55=ES|48=00A0CQ00ESZ|10455=ESH6|167=FUT|207=CME|15=USD|1=systematix|47=A|204=0|10553=SYSTEMATIX|18203=CME|16142=IN|18216=A49004_-1|198=5ZXTI|37=0GKFYD004|17=0GKFYD004:0|58=Created from existing|200=201603|151=5|14=0|54=2|40=2|77=O|59=0|11028=Y|150=0|20=0|39=0|442=1|44=194100|38=5|6=0|60=20150917-11:59:23.389|146=0|10=050|
Send(09/17/2015-11:59:23.447)|8=FIX.4.2|9=00502|35=8|49=TTDS68BO|56=SYSTEMATIX|50=TTORDDS510001|57=NONE|34=24|52=20150917-11:59:23.447|55=ES|48=00A0CQ00ESZ|10455=ESH6|167=FUT|207=CME|15=USD|1=systematix|47=A|204=0|10553=SYSTEMATIX|375=CME000A|18203=CME|16142=IN|18216=A49004_-1|198=5ZXTI|37=0GKFYD004|17=101hw7uipr5wi|58=Fill|10527=64213:M:140341TN0000114|16018=nusfo0|200=201603|32=5|151=0|14=5|75=20150917|54=2|40=2|77=O|59=0|11028=Y|150=2|20=0|39=2|442=1|44=194100|38=5|31=194100|6=194100|60=20150917-11:59:23.389|6038=20150917-22:29:18.637|146=0|10=252|
Recv(09/17/2015-11:59:23.492)|8=FIX.4.2|9=154|35=3|34=24|49=SYSTEMATIX|50=NONE|52=20150917-11:59:18.891|56=TTDS68BO|57=TTORDDS510001|45=23|58=Tag not defined for this message type|371=146|372=8|373=2|10=093|
Recv(09/17/2015-11:59:23.708)|8=FIX.4.2|9=154|35=3|34=25|49=SYSTEMATIX|50=NONE|52=20150917-11:59:19.106|56=TTDS68BO|57=TTORDDS510001|45=24|58=Tag not defined for this message type|371=146|372=8|373=2|10=085|

On Thu, Sep 17, 2015 at 10:44 AM, Grant Birchmeier <gbirchmeier at connamara.com> wrote:
Are you using qfn_uidemo to connect to an actual live counterparty?  DON'T DO THAT.

From the qfn_uidemo 
Readme:

UIDemo is not meant to be a production-ready client. It is merely an example, and will likely not work as-is on any real exchange, given that virtually all exchanges have custom modifications to the standard FIX data dictionary that UIDemo uses.

If you experimenting with QF/n, I suggest you run the example apps that are in the main repo.  There are initiators and acceptors that are preconfigured to run against each other.

qfn_uidemo is a proof-of-concept of how a UI could be written.  If you are new to QF/n, ignore it.  (In fact, I think I might take that repo down to prevent this from happening again.)

If you are learning how to connect with TT, start by writing your own command-line app.  Don't try anything fancy until you can logon, logoff, and exchange heartbeats, and know how to read your message/event logs.  (I mean the REAL QF/n-generated message/event logs; do NOT roll your own logs by putting print statements in callbacks.)

-Grant

On Wed, Sep 16, 2015 at 11:46 PM, Kamal Saxena <kamal.saxena at systematixindia.com> wrote:
Hello Team,

I am using QuickFix UI Demo & QuickFixn Class Library code (C#) with configuration  as per (QuickFixN) instruction but I am unable to connect.

I have getting this message after configuration settings in UI Demo solution.
Failed Message
(8=FIX.4.2|9=79|35=A|34=1|49=SYSTEMATIX|52=20150911-13:41:25.925|56=TTDS68BO|98=0|108=30|141=Y|10=141| )

NOTE : I have discussion with TT Support Team. X_Trader required below type of message for connect to TT Server.

8=FIX.4.2|9=79|35=A|34=1|49=SYSTEMATIX|52=20150916-12:00:04.283|56=TTDS68BO|98=0|108=30|141=Y|10=134|

8=FIX.4.2|9=00128|35=5|49=TTDS68BO|56=SYSTEMATIX|34=1|52=20150916-12:00:07.972|58=RawData(96) - Password needed to login to TT User Setup|18000=1|10=122|

I am missing password fields(96), How to Send password using FIX42.xml

I have set configuration in quickfix.cfg file. please verify it's correct.

[DEFAULT]
ConnectionType=initiator
ReconnectInterval=2
FileStorePath=store
FileLogPath=log
StartTime=12:00:00
EndTime=23:00:00
UseDataDictionary=Y
DataDictionary=C:\Users\Admin\Downloads\qfn_uidemo-master\qfn_uidemo-master\UIDemo\UIDemo\FIX42.xml
SocketConnectHost=208.184.251.216
SocketConnectPort=10690
#SocketConnectPort=10200
LogoutTimeout=5
ResetOnLogon=Y
ResetOnDisconnect=Y
DefaultApplVerID=FIX.4.2

[SESSION]
# inherit ConnectionType, ReconnectInterval and SenderCompID from default
BeginString=FIX.4.2
SenderCompID=SYSTEMATIX
TargetCompID=TTDS68BO
HeartBtInt=30
RawData=12345678
#TransportDataDictionary=C:\Users\Admin\Downloads\qfn_uidemo-master\qfn_uidemo-master\UIDemo\UIDemo\FIX42.xml

-- 
Kamal Saxena
Software Engineer
Systematix Infotech Pvt. Ltd.
India | Australia | United Kingdom | United States
Plot No. 67, PU-4 Commercial, Behind C21 Mall | AB Road Indore
Mob: +91-9644122296 | Tel: 0731-2570282| Skype:kamal_sipl
Website Address: http://systematixinfotech.com

Follow Us: Facebook | Google+ | LinkedIn | Twitter

Disclaimer: This e-mail, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information.  Any unauthorized review, use, disclosure, or distribution is prohibited.  If you are not the intended recipient, please contact the sender immediately and destroy all copies of the original message.
_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com

-- 
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com

_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com

-- 
Kamal Saxena
Software Engineer
Systematix Infotech Pvt. Ltd.
India | Australia | United Kingdom | United States
Plot No. 67, PU-4 Commercial, Behind C21 Mall | AB Road Indore
Mob: +91-9644122296 | Tel: 0731-2570282| Skype:kamal_sipl
Website Address: http://systematixinfotech.com

Follow Us: Facebook | Google+ | LinkedIn | Twitter

Disclaimer: This e-mail, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information.  Any unauthorized review, use, disclosure, or distribution is prohibited.  If you are not the intended recipient, please contact the sender immediately and destroy all copies of the original message.
_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20150917/8135bfb0/attachment-0002.htm>