{{Quickfixn}} session issue

[Shamon, John]

ICE shuts down at 12 midnight Sat and reopen at 12 Midnight Monday  and that is in GMT.

From: Quickfixn [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Grant Birchmeier
Sent: Monday, October 27, 2014 12:20 PM
To: Mailing list for QuickFIX/n
Subject: Re: {{Quickfixn}} session issue

Just to confirm before I start looking into code, what was your intended StartTime/EndTime?  Please tell me using am/pm in your PST time zone.

On Mon, Oct 27, 2014 at 1:58 PM, Grant Birchmeier <gbirchmeier at connamara.com<mailto:gbirchmeier at connamara.com>> wrote:
StartTime/EndTime should be specified in 24-hour time.  If you mean midnight, then you should use 00:00.

On Mon, Oct 27, 2014 at 1:57 PM, Shamon, John <jshamon at semprausgp.com<mailto:jshamon at semprausgp.com>> wrote:
Putting 00:00:00 made it work

From: Shamon, John
Sent: Monday, October 27, 2014 11:55 AM
To: Mailing list for QuickFIX/n
Subject: RE: {{Quickfixn}} session issue

Got it.. your DLLs, thanks.
Btw .. I think 12:00:00 is shifting my time,
I might do 00:00:00


From: Quickfixn [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Grant Birchmeier
Sent: Monday, October 27, 2014 11:52 AM
To: Mailing list for QuickFIX/n
Subject: Re: {{Quickfixn}} session issue

To be clear, I meant I'm going to check the *Quickfix/N* code.  I'm not asking for our code.

On Mon, Oct 27, 2014 at 1:50 PM, Grant Birchmeier <gbirchmeier at connamara.com<mailto:gbirchmeier at connamara.com>> wrote:
​For now, I know you can resolve this by changing your StartTime/EndTime to be in UTC​ and then commenting out the "TimeZone" parameter.

I'm going to check the code to make sure TimeZone is working properly.  It should be working; I assume there's a test for it to confirm.  But I can't explain your observed failure any other way.  "Pacific Standard Time" appears to be a valid string.  Maybe a DST issue?


On Mon, Oct 27, 2014 at 1:34 PM, Shamon, John <jshamon at semprausgp.com<mailto:jshamon at semprausgp.com>> wrote:
That is what I’m doing, and based on your comment, I thought I had to wait for 2 hours, actually .. it is always good at noon Pacific time, so something has to do with timezone.

[DEFAULT]
FileStorePath=storepath
FileLogPath=Logpath
ConnectionType=initiator
StartDay=Monday
StartTime=12:00:00
EndDay=Saturday
EndTime=11:30:00
TimeZone=Pacific Standard Time


[SESSION]
SenderCompID=xxxx
SenderSubID=1
TargetCompID=ICE
BeginString=FIX.4.4
DataDictionary=FIX44.xml
SocketConnectHost=127.0.0.1
SocketConnectPort=104
SocketUseSSL=N
HeartBtInt=30
ReconnectInterval=15
ResetOnDisconnect=Y
RefreshOnLogon=Y
ResetOnLogon=Y
ResetOnLogout=Y
MaxLatency=380

John Shamon
Application Developer
Sempra U.S. Gas & Power, 619-696-1809<tel:619-696-1809>
jshamon at SempraUSGP.com<mailto:jshamon at SempraUSGP.com>

Sempra U.S. Gas & Power, LLC is not the same company as the utility, San Diego Gas & Electric Company (SDG&E) or Southern California Gas Company (SoCalGas), and Sempra U.S. Gas & Power is not regulated by the California Public Utilities Commission.


From: Quickfixn [mailto:quickfixn-bounces at lists.quickfixn.com<mailto:quickfixn-bounces at lists.quickfixn.com>] On Behalf Of Grant Birchmeier
Sent: Monday, October 27, 2014 11:19 AM
To: Mailing list for QuickFIX/n
Subject: Re: {{Quickfixn}} session issue

What's your config?

I'm wondering if your StartTime/EndTime is not in the time zone you think it's in.  Since it happens every Monday (and only Monday I assume), I'm wondering if you have configured a weeklong session (you shouldn't) and if your StartTime is being converted to another time zone.

On Mon, Oct 27, 2014 at 1:12 PM, Shamon, John <jshamon at semprausgp.com<mailto:jshamon at semprausgp.com>> wrote:
Anybody has an idea of how to fix this? It is almost consistent now every Monday I get the same error, and I need to wait for a couple of hours.

From: Quickfixn [mailto:quickfixn-bounces at lists.quickfixn.com<mailto:quickfixn-bounces at lists.quickfixn.com>] On Behalf Of Shamon, John
Sent: Thursday, October 23, 2014 9:04 AM
To: Mailing list for QuickFIX/n
Subject: {{Quickfixn}} session issue

Hi all:

I got this message few times in different days, I needed to wait for at least 2 hours before I can connect,
The below from the log file, the log message file is empty which as you know It didn’t make it to send TCR request or any admin message

20141013-16:56:55.122 : Session FIX.4.4:2671/1->ICE already disconnected: Resetting...
20141013-16:56:55.128 : Session reset: Out of SessionTime (Session construction)

Thanks.
-John

_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com<mailto:Quickfixn at lists.quickfixn.com>
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com



--
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com

_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com<mailto:Quickfixn at lists.quickfixn.com>
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com



--
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com



--
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com

_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com<mailto:Quickfixn at lists.quickfixn.com>
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com



--
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com



--
Grant Birchmeier
Connamara Systems, LLC
Made-To-Measure Trading Solutions.
Exactly what you need. No more. No less.
http://connamara.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20141027/ab173c3d/attachment-0001.htm>