{{Quickfixn}} Log In troubles
Ashutosh Mishra
A.Mishra at ny.tr.mufg.jp
Thu Nov 21 10:23:07 PST 2013
Follow Grant's advise...Go through the Example Application on the QuickFix website, and you should be able to run your application. Try to get the flow of the example aplication and define your configuration in a text file.
Thanks & Regards,
Ashutosh Mishra
*********************************************************************************
This communication (including any attachments) is intended only or the use of the individual whom it is addressed and may contain information that is privileged, confidential or legally protected. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message. Please also delete the message and its attachments, if any, from your computer and destroy any hard copies you may have created. Thank you for your cooperation.
*********************************************************************************
From: quickfixn-bounces at lists.quickfixn.com [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Erika Hernandez
Sent: Thursday, November 21, 2013 1:15 PM
To: Mailing list for QuickFIX/n
Subject: Re: {{Quickfixn}} Log In troubles
Classification: Public
Hi Ashutosh,
I tried to use this:
My intention was setting the Session to LogIn to the server and then send and order:
QuickFix.Dictionary config = CreateConfig();
QuickFix.SessionID sessionID = new QuickFix.SessionID("FIX.4.2", "here I put the sender ", "Here I put the target");
QuickFix.SessionSettings settings = new QuickFix.SessionSettings();
settings.Set(sessionID, config);
App = new QFApp(settings);
Initiator = new MockInitiator();
App.Initiator = Initiator;
Session = new SessionThatTracksOutbound(
App,
new QuickFix.MemoryStoreFactory(),
sessionID,
new QuickFix.DataDictionaryProvider(),
new QuickFix.SessionSchedule(config),
0,
new QuickFix.ScreenLogFactory(settings),
new QuickFix.DefaultMessageFactory(),
"blah");
var order = new QuickFix.FIX42.NewOrderSingle();
order.ClOrdID = new ClOrdID("myOrder");
order.Side = new Side(Side.BUY);
order.OrdType = new OrdType(OrdType.LIMIT);
order.Symbol = new Symbol("AB");
order.Price = new Price((decimal)19.00);
order.Account = new Account("TestAccount");
order.ExDestination = new ExDestination("ARCA_QA");
order.OrderQty = new OrderQty((decimal)995);
order.TimeInForce = new TimeInForce(Convert.ToChar("0"));
order.SecurityID = new SecurityID("AB.N");
order.HandlInst = new HandlInst(HandlInst.AUTOMATED_EXECUTION_ORDER_PUBLIC_BROKER_INTERVENTION_OK);
Session.SendToTarget(order);
but that is not reading the config file, so I set the data here:
private static QuickFix.Dictionary CreateConfig()
{
QuickFix.Dictionary config = new QuickFix.Dictionary();
config.SetBool(QuickFix.SessionSettings.PERSIST_MESSAGES, true);
config.SetString(QuickFix.SessionSettings.CONNECTION_TYPE, "initiator");
config.SetString(QuickFix.SessionSettings.START_TIME, "00:00:00");
config.SetString(QuickFix.SessionSettings.END_TIME, "00:00:00");
config.SetString(QuickFix.SessionSettings.SOCKET_CONNECT_HOST, "here I put my host ");
config.SetString(QuickFix.SessionSettings.SOCKET_CONNECT_PORT, "here I put my port");
config.SetString(QuickFix.SessionSettings.DATA_DICTIONARY, "FIX42.xml");
return config;
}
but It's not working.... It doesn't throw any exception but is not creating the order.
could you please tell me in which file of the solution I can see the flow that you described below?
Thanks & regards!!
********************************************************************************************************
This email is sent to you by Infosys Limited on behalf of Deutsche Bank.
Diese email wurde Ihnen von Infosys Limited im Auftrag der Deutschen Bank gesendet
*********************************************************************************************************
From:
Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp<mailto:A.Mishra at ny.tr.mufg.jp>>
To:
Mailing list for QuickFIX/n <quickfixn at lists.quickfixn.com<mailto:quickfixn at lists.quickfixn.com>>,
Date:
11/21/2013 12:00 PM
Subject:
Re: {{Quickfixn}} Log In troubles
________________________________
The flow of the example on QuickFix website is quite clear. I am dealing with execution report, so, once initiator.start() runs in the main program, the control goes to ToAdmin and than to FromAdmin. Once you receive the message from the other party the control goes to FromApp --which is the place where you can have your fields extracted.
If you have defined your Config file properly than everything should work fine.
Thanks & Regards,
Ashutosh Mishra
*********************************************************************************
This communication (including any attachments) is intended only or the use of the individual whom it is addressed and may contain information that is privileged, confidential or legally protected. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message. Please also delete the message and its attachments, if any, from your computer and destroy any hard copies you may have created. Thank you for your cooperation.
*********************************************************************************
From: quickfixn-bounces at lists.quickfixn.com<mailto:quickfixn-bounces at lists.quickfixn.com> [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Erika Hernandez
Sent: Thursday, November 21, 2013 11:37 AM
To: Mailing list for QuickFIX/n
Subject: Re: {{Quickfixn}} Log In troubles
Classification: Public
Yes , I already did that, however , following the example, I didn't see any part where this file is really being read. Even if I put wrong data on this config file, the test case which try to connect and disconnect is always passing well instead of failing.
********************************************************************************************************
This email is sent to you by Infosys Limited on behalf of Deutsche Bank.
Diese email wurde Ihnen von Infosys Limited im Auftrag der Deutschen Bank gesendet
*********************************************************************************************************
From:
Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp<mailto:A.Mishra at ny.tr.mufg.jp>>
To:
Mailing list for QuickFIX/n <quickfixn at lists.quickfixn.com<mailto:quickfixn at lists.quickfixn.com>>,
Date:
11/21/2013 11:32 AM
Subject:
Re: {{Quickfixn}} Log In troubles
________________________________
Did you configure your cfg file, it contains all the configuration for the Default as well as for the Session.
Thanks & Regards,
Ashutosh Mishra
From: quickfixn-bounces at lists.quickfixn.com<mailto:quickfixn-bounces at lists.quickfixn.com> [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Erika Hernandez
Sent: Thursday, November 21, 2013 11:28 AM
To: quickfixn at lists.quickfixn.com<mailto:quickfixn at lists.quickfixn.com>
Subject: {{Quickfixn}} Log In troubles
Classification: Public
Hi ,
I'm ver y new using FIX , I'm trying to send an order from C# to our server.
I think this approach will work fine:
var order = new QuickFix.FIX42.NewOrderSingle();
order.ClOrdID = new ClOrdID("myOrder");
order.Side = new Side(Side.BUY);
order.OrdType = new OrdType(OrdType.LIMIT);
order.Symbol = new Symbol("AB");
order.Price = new Price((decimal)19.00);
order.Account = new Account("TestAccount");
order.ExDestination = new ExDestination("ARCA_QA");
order.OrderQty = new OrderQty((decimal)995);
order.TimeInForce = new TimeInForce(Convert.ToChar("0"));
order.SecurityID = new SecurityID("AB.N");
order.HandlInst = new HandlInst(HandlInst.AUTOMATED_EXECUTION_ORDER_PUBLIC_BROKER_INTERVENTION_OK);
Session.SendToTarget(order);
But previously I need to set a connection with the server , but I don't know how to log in, I found this approach in the sample code:
QuickFix.Message msg = new QuickFix.FIX42.Logon();
But I don't know how to execute it or setting the connection data ( host, port, senderCompID , targetCompID) , I tried to follow the example but is not clear enough for me.
Does anyone can help me , please?
I would really appreciate any help.
Regards,
Erika
********************************************************************************************************
This email is sent to you by Infosys Limited on behalf of Deutsche Bank.
Diese email wurde Ihnen von Infosys Limited im Auftrag der Deutschen Bank gesendet
*********************************************************************************************************
---
This communication may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this communication
in error) please notify the sender immediately and destroy this
communication. Any unauthorized copying, disclosure or distribution of the
material in this communication is strictly forbidden.
Deutsche Bank does not render legal or tax advice, and the information
contained in this communication should not be regarded as such._______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com<mailto:Quickfixn at lists.quickfixn.com>
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
---
This communication may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this communication
in error) please notify the sender immediately and destroy this
communication. Any unauthorized copying, disclosure or distribution of the
material in this communication is strictly forbidden.
Deutsche Bank does not render legal or tax advice, and the information
contained in this communication should not be regarded as such._______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com<mailto:Quickfixn at lists.quickfixn.com>
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
---
This communication may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this communication
in error) please notify the sender immediately and destroy this
communication. Any unauthorized copying, disclosure or distribution of the
material in this communication is strictly forbidden.
Deutsche Bank does not render legal or tax advice, and the information
contained in this communication should not be regarded as such.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20131121/6fa7de02/attachment-0002.htm>
More information about the Quickfixn
mailing list