{{Quickfixn}} Next release
Walter Robert Ditzler
ditwal001 at gmail.com
Thu Nov 21 01:43:09 PST 2013
hi,
in vs2013 u dont need ruby at all. i use quickfixn since begining of my project as a self compiled dll, my requirement were in some changes in the log handler and 64bit only version.
never run into any issue,
walter
***
Walter Robert Ditzler
cel +41765874111
On 21 Nov 2013, at 09:55, Manuel Lopez <lopez.post at gmail.com> wrote:
Just wondering if a new release of quickfix rolling up the changes is
around the .corner. I'm trying to avoid ruby and genera slags for
compliation (to vs2013).
Thanks,
--Manuel
> On Wed, Nov 20, 2013 at 9:50 AM, <quickfixn-request at lists.quickfixn.com> wrote:
> Send Quickfixn mailing list submissions to
> quickfixn at lists.quickfixn.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
> or, via email, send a message with subject or body 'help' to
> quickfixn-request at lists.quickfixn.com
>
> You can reach the person managing the list at
> quickfixn-owner at lists.quickfixn.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Quickfixn digest..."
>
>
> Today's Topics:
>
> 1. Re: Please help me with QuickFix (Grant Birchmeier)
> 2. Re: Please help me with QuickFix (Nirjhar Jain)
> 3. Re: FW: FW: Custom_Fields (Grant Birchmeier)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 20 Nov 2013 08:30:20 -0600
> From: Grant Birchmeier <gbirchmeier at connamara.com>
> To: "Mailing list for QuickFIX/n" <quickfixn at lists.quickfixn.com>
> Subject: Re: {{Quickfixn}} Please help me with QuickFix
> Message-ID:
> <CAMq4opNDVJYa7QXSAm4cNexsnGoVG3SyKYirKZP_oVqErHKXzQ at mail.gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> "gem install" does that for you.
>
>
> On Wed, Nov 20, 2013 at 8:30 AM, Nirjhar Jain <nirjhar.jain at commdel.net>wrote:
>
>> But What about nokogiri download?
>>
>>
>> Thanks & Regards,
>> Nirjhar Jain
>> Software Engineer
>>
>> COMMDEL
>> Commdel Consulting Services P Ltd,
>> H-134, Sector-63, Noida - U.P. (India)
>>
>> www.commdel.net
>> A n I S O 9 0 0 1 : 2 0 0 8 C e r t i f i e d C o m p a n y
>> Payment Enterprise Mobility Internet
>>
>> -----Original Message-----
>> From: quickfixn-bounces at lists.quickfixn.com
>> [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Toshiyuki Tega
>> Sent: Wednesday, November 20, 2013 7:29 PM
>> To: quickfixn at lists.quickfixn.com
>> Subject: Re: {{Quickfixn}} Please help me with QuickFix
>>
>> Refer to https://github.com/connamara/quickfixn
>>
>> Specifically, how about trying:
>>
>>> gem install nokogiri
>>> generate.bat
>>> build.bat
>>
>> (2013/11/20 22:23), Nirjhar Jain wrote:
>>> Hi Grant,
>>>
>>> I am unable to regenerate the code after adding a custom tag 9063 in
>>> the MarketDataSnapshotFullRefresh message in spec.xml file, as I can?t
>>> download nokogiri from this link:
>>>
>>> http://rubygems.org/gems/nokogiri/versions/1.5.10-x86-mswin32-60
>>>
>>> On clicking on download button, I am getting redirected to:
>>>
>>> http://rubygems.org/downloads/nokogiri-1.5.10-x86-mswin32-60.gem
>>>
>>> which is showing an error message: 400 Bad Request.
>>
>>
>> --
>> Toshiyuki Tega
>> President and Chief Executive Officer
>> Softgate Limited - http://www.softgate.co.jp/
>> _______________________________________________
>> Quickfixn mailing list
>> Quickfixn at lists.quickfixn.com
>> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>>
>> _______________________________________________
>> Quickfixn mailing list
>> Quickfixn at lists.quickfixn.com
>> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>
>
> --
> Grant Birchmeier
> *Connamara Systems, LLC*
> *Made-To-Measure Trading Solutions.*
> Exactly what you need. No more. No less.
> http://connamara.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20131120/3ceea582/attachment-0001.htm>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 20 Nov 2013 20:07:06 +0530
> From: "Nirjhar Jain" <nirjhar.jain at commdel.net>
> To: "'Mailing list for QuickFIX/n'" <quickfixn at lists.quickfixn.com>
> Subject: Re: {{Quickfixn}} Please help me with QuickFix
> Message-ID: <01dc01cee5fd$fcc468e0$f64d3aa0$@commdel.net>
> Content-Type: text/plain; charset="us-ascii"
>
> I did this in ruby cmd and got the error:
>
>
>
> C:\Users\nirjhar.jain>gem install nokogiri
>
> ERROR: While executing gem ... (Gem::RemoteFetcher::FetchError)
>
> too many bad responses
> (http://bb-m.rubygems.org/gems/mini_portile-0.5.2.gem
>
> )
>
>
>
>
>
> Thanks & Regards,
>
> Nirjhar Jain
>
> Software Engineer
>
>
> COMMDEL
>
> Commdel Consulting Services P Ltd,
>
> H-134, Sector-63, Noida - U.P. (India)
>
>
>
> <http://www.commdel.net/> www.commdel.net
>
> A n I S O 9 0 0 1 : 2 0 0 8 C e r t i f i e d C o m p a n y
>
> Payment Enterprise Mobility Internet
>
>
>
> From: quickfixn-bounces at lists.quickfixn.com
> [mailto:quickfixn-bounces at lists.quickfixn.com] On Behalf Of Grant Birchmeier
> Sent: Wednesday, November 20, 2013 8:00 PM
> To: Mailing list for QuickFIX/n
> Subject: Re: {{Quickfixn}} Please help me with QuickFix
>
>
>
> "gem install" does that for you.
>
>
>
> On Wed, Nov 20, 2013 at 8:30 AM, Nirjhar Jain <nirjhar.jain at commdel.net
> <mailto:nirjhar.jain at commdel.net> > wrote:
>
> But What about nokogiri download?
>
>
> Thanks & Regards,
> Nirjhar Jain
> Software Engineer
>
> COMMDEL
> Commdel Consulting Services P Ltd,
> H-134, Sector-63, Noida - U.P. (India)
>
> www.commdel.net <http://www.commdel.net>
> A n I S O 9 0 0 1 : 2 0 0 8 C e r t i f i e d C o m p a n y
> Payment Enterprise Mobility Internet
>
>
> -----Original Message-----
> From: quickfixn-bounces at lists.quickfixn.com
> <mailto:quickfixn-bounces at lists.quickfixn.com>
> [mailto:quickfixn-bounces at lists.quickfixn.com
> <mailto:quickfixn-bounces at lists.quickfixn.com> ] On Behalf Of Toshiyuki Tega
> Sent: Wednesday, November 20, 2013 7:29 PM
> To: quickfixn at lists.quickfixn.com <mailto:quickfixn at lists.quickfixn.com>
> Subject: Re: {{Quickfixn}} Please help me with QuickFix
>
> Refer to https://github.com/connamara/quickfixn
>
> Specifically, how about trying:
>
>> gem install nokogiri
>> generate.bat
>> build.bat
>
> (2013/11/20 22:23), Nirjhar Jain wrote:
>> Hi Grant,
>>
>> I am unable to regenerate the code after adding a custom tag 9063 in
>> the MarketDataSnapshotFullRefresh message in spec.xml file, as I can't
>> download nokogiri from this link:
>>
>> http://rubygems.org/gems/nokogiri/versions/1.5.10-x86-mswin32-60
>>
>> On clicking on download button, I am getting redirected to:
>>
>> http://rubygems.org/downloads/nokogiri-1.5.10-x86-mswin32-60.gem
>>
>> which is showing an error message: 400 Bad Request.
>
>
> --
> Toshiyuki Tega
> President and Chief Executive Officer
> Softgate Limited - http://www.softgate.co.jp/
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com <mailto:Quickfixn at lists.quickfixn.com>
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com <mailto:Quickfixn at lists.quickfixn.com>
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>
>
>
>
>
>
> --
>
> Grant Birchmeier
>
> Connamara Systems, LLC
>
> Made-To-Measure Trading Solutions.
>
> Exactly what you need. No more. No less.
>
> http://connamara.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20131120/3b10b192/attachment-0001.htm>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 20 Nov 2013 08:50:04 -0600
> From: Grant Birchmeier <gbirchmeier at connamara.com>
> To: "Mailing list for QuickFIX/n" <quickfixn at lists.quickfixn.com>
> Subject: Re: {{Quickfixn}} FW: FW: Custom_Fields
> Message-ID:
> <CAMq4opMEk_cbwKqpfbPcPYoCKxKkEYgBvwMXwiW0BjZU9JfFRw at mail.gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> 1903 is not in the default set of fields for FIX4.4 or any other FIX
> version. You can verify this yourself if you look at the spec or check
> FIXimate (http://www.fixtradingcommunity.org/FIXimate/FIXimate3.0/).
>
> Therefore, I can only conclude that your counterparty invented this field,
> and therefore you must add it to your DD xml file. Same for field 1906.
> Your engine will have no idea what 1903 or 1906 are if you don't add them
> to your DD xml file.
>
> I don't know what you asked your counterparty or what they answered back,
> but someone is wrong or something was misunderstood. They are probably not
> using QuickFIX, so they probably can't give you good QuickFIX advice.
>
> *You need to get ahold of the spec for your counterparty's interface, and
> see what message and field changes they made to the default definitions,
> and then make the corresponding changes to your DD xml file.*
>
> This page has advice on altering the DD file:
>
> http://www.quickfixn.org/tutorial/custom-fields-groups-and-messages
>
> -Grant
>
>
>
> On Wed, Nov 20, 2013 at 8:29 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>wrote:
>
>> Hi Grant,
>>
>> I am sending this email again as I don?t know, my emails bounced and I
>> had to re-enable my membership.
>>
>>
>>
>> I am still having problem in getting field 1903
>>
>> I was trying to get the Unique Swap Identifier (Tad ID =1903), but it
>> gives me an error -" Field with Tad ID = 1903 not found" -- *But it
>> exists in the exection report.*
>>
>> I talked to the other party and they said that I need not add any custom
>> field to the DD file. I am really lost here and need help.
>>
>>
>>
>>
>>
>> Thanks & Regards,
>>
>> Ashutosh Mishra
>>
>>
>>
>>
>> *********************************************************************************
>>
>> This communication (including any attachments) is intended only or the use
>> of the individual whom it is addressed and may contain information that is
>> privileged, confidential or legally protected. If the reader of this
>> message is not the intended recipient, you are hereby notified that any
>> dissemination, distribution or copying of this communication is strictly
>> prohibited. If you have received this communication in error, please notify
>> us immediately by replying to the message. Please also delete the message
>> and its attachments, if any, from your computer and destroy any hard copies
>> you may have created. Thank you for your cooperation.
>>
>>
>> *********************************************************************************
>>
>>
>>
>> *From:* quickfixn-bounces at lists.quickfixn.com [
>> mailto:quickfixn-bounces at lists.quickfixn.com<quickfixn-bounces at lists.quickfixn.com>]
>> *On Behalf Of *Grant Birchmeier
>> *Sent:* Wednesday, November 13, 2013 11:36 AM
>> *To:* Mailing list for QuickFIX/n
>> *Subject:* Re: {{Quickfixn}} FW: Custom_Fields
>>
>>
>>
>> See this page:
>>
>> http://quickfixn.org/tutorial/repeating-groups
>>
>>
>>
>> You should really spend some time reading all the tutorial pages on the
>> quickfixn web site.
>>
>>
>>
>> On Wed, Nov 13, 2013 at 10:31 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>
>> wrote:
>>
>> What do I need to do fro the repaeting group?
>>
>>
>>
>> Thanks & Regards,
>>
>> Ashutosh Mishra
>>
>>
>>
>>
>> *********************************************************************************
>>
>> This communication (including any attachments) is intended only or the use
>> of the individual whom it is addressed and may contain information that is
>> privileged, confidential or legally protected. If the reader of this
>> message is not the intended recipient, you are hereby notified that any
>> dissemination, distribution or copying of this communication is strictly
>> prohibited. If you have received this communication in error, please notify
>> us immediately by replying to the message. Please also delete the message
>> and its attachments, if any, from your computer and destroy any hard copies
>> you may have created. Thank you for your cooperation.
>>
>>
>> *********************************************************************************
>>
>>
>>
>> *From:* quickfixn-bounces at lists.quickfixn.com [mailto:
>> quickfixn-bounces at lists.quickfixn.com] *On Behalf Of *Grant Birchmeier
>> *Sent:* Wednesday, November 13, 2013 11:14 AM
>>
>>
>> *To:* Mailing list for QuickFIX/n
>> *Subject:* Re: {{Quickfixn}} FW: Custom_Fields
>>
>>
>>
>> If this field is not in a repeating group, and if your DD is accurate,
>> then that code should work.
>>
>>
>>
>>
>>
>>
>>
>> On Wed, Nov 13, 2013 at 10:06 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>
>> wrote:
>>
>> I just want to make sure tht I am not making any mistake in my code/logic.
>> I am using the following code to get the field:
>>
>>
>>
>> I have used the following code in the Message Cracker (which is I got from
>> QuickFix website):
>>
>>
>>
>> const int UniqueSwID = 1903;
>>
>> string uSID = message.GetString(UniqueSwID);
>>
>>
>>
>> Am I on the right track? Will also look into the DD file.
>>
>>
>>
>> Thanks & Regards,
>>
>> Ashutosh Mishra
>>
>>
>>
>>
>> *********************************************************************************
>>
>> This communication (including any attachments) is intended only or the use
>> of the individual whom it is addressed and may contain information that is
>> privileged, confidential or legally protected. If the reader of this
>> message is not the intended recipient, you are hereby notified that any
>> dissemination, distribution or copying of this communication is strictly
>> prohibited. If you have received this communication in error, please notify
>> us immediately by replying to the message. Please also delete the message
>> and its attachments, if any, from your computer and destroy any hard copies
>> you may have created. Thank you for your cooperation.
>>
>>
>> *********************************************************************************
>>
>>
>>
>> *From:* quickfixn-bounces at lists.quickfixn.com [mailto:
>> quickfixn-bounces at lists.quickfixn.com] *On Behalf Of *Grant Birchmeier
>> *Sent:* Wednesday, November 13, 2013 10:57 AM
>>
>>
>> *To:* Mailing list for QuickFIX/n
>> *Subject:* Re: {{Quickfixn}} FW: Custom_Fields
>>
>>
>>
>> Both parties need to agree on the message definitions. In my experience,
>> no one uses the default definitions as is, so yes, you do need to make
>> changes to your DD file.
>>
>>
>>
>> Your DD file must properly reflect the definitions that your counterparty
>> has specified.
>>
>>
>>
>> This page has advice on altering the DD file:
>>
>> http://www.quickfixn.org/tutorial/custom-fields-groups-and-messages
>>
>>
>>
>> On Wed, Nov 13, 2013 at 9:43 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>
>> wrote:
>>
>> I am using FIX 4.4.
>>
>> This is the execution report :
>>
>> *from App8=FIX.4.49=638735=834=249=TRADEWEB52=20131113-14
>> <20131113-14>:10:18.25956=MITUFJTR347=UTF-86=0.713014=100000015=USD17=DB13DLRWDX00035122=I30=TRWB31=0.713032=100000037=NONREF38=100000039=248=[FpML]54=R55=[N/A]58=Single
>> Dealer60=20131113-14:10:1864=2013111575=20131113107=IRS USD 3Y vs 3M
>> LIBOR150=F151=0167=IRS198=DB13DLRWDX00035350=5755351 ?.<FPML> ? </FPML*
>>
>> *423=9460=12541=201611156731=20131113.DLRW.DSWP.3520212=Y20214=R453=4448=DLRWUS31447=B452=1448=UFJ
>> Trust and
>> Banking447=C452=3448=-A.Mishra at ny.tr.mufg.jp447=C452=11448=DTCC447=C452=1101907=11903=00000000SK87201311130000003500001904=01905=1010TWTEST1906=010=172
>> <Banking447=C452=3448=-A.Mishra at ny.tr.mufg.jp447=C452=11448=DTCC447=C452=1101907=11903=00000000SK87201311130000003500001904=01905=1010TWTEST1906=010=172>*
>>
>>
>>
>> The field 1903 comes in the execution report.
>>
>> I did not add any field in the DD file as, in one of the previous replies
>> you had mentioned that the DD file will be known to both the parties-- and
>> as I am just extracting the fields from the execution report, do I have to
>> modify the DD file?
>>
>>
>>
>> Thanks & Regards,
>>
>> Ashutosh Mishra
>>
>>
>> --
> Grant Birchmeier
> *Connamara Systems, LLC*
> *Made-To-Measure Trading Solutions.*
> Exactly what you need. No more. No less.
> http://connamara.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20131120/ae7c21f2/attachment.htm>
>
> ------------------------------
>
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>
> End of Quickfixn Digest, Vol 25, Issue 49
> *****************************************
_______________________________________________
Quickfixn mailing list
Quickfixn at lists.quickfixn.com
http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
More information about the Quickfixn
mailing list