{{Quickfixn}} FW: Custom_Fields

Wed Nov 13 08:14:28 PST 2013

If this field is not in a repeating group, and if your DD is accurate, then
that code should work.

On Wed, Nov 13, 2013 at 10:06 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>wrote:

>  I just want to make sure tht I am not making any mistake in my
> code/logic. I am using the following code to get the field:
>
>
>
> I have used the following code in the Message Cracker (which is I got from
> QuickFix website):
>
>
>
> const int UniqueSwID = 1903;
>
> string uSID = message.GetString(UniqueSwID);
>
>
>
> Am I on the right track? Will also look into the DD file.
>
>
>
> Thanks & Regards,
>
> Ashutosh Mishra
>
>
>
>
> *********************************************************************************
>
> This communication (including any attachments) is intended only or the use
> of the individual whom it is addressed and may contain information that is
> privileged, confidential or legally protected.  If the reader of this
> message is not the intended recipient, you are hereby notified that any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> us immediately by replying to the message.  Please also delete the message
> and its attachments, if any, from your computer and destroy any hard copies
> you may have created.  Thank you for your cooperation.
>
>
> *********************************************************************************
>
>
>
> *From:* quickfixn-bounces at lists.quickfixn.com [mailto:
> quickfixn-bounces at lists.quickfixn.com] *On Behalf Of *Grant Birchmeier
> *Sent:* Wednesday, November 13, 2013 10:57 AM
>
> *To:* Mailing list for QuickFIX/n
> *Subject:* Re: {{Quickfixn}} FW: Custom_Fields
>
>
>
> Both parties need to agree on the message definitions.  In my experience,
> no one uses the default definitions as is, so yes, you do need to make
> changes to your DD file.
>
>
>
> Your DD file must properly reflect the definitions that your counterparty
> has specified.
>
>
>
> This page has advice on altering the DD file:
>
> http://www.quickfixn.org/tutorial/custom-fields-groups-and-messages
>
>
>
> On Wed, Nov 13, 2013 at 9:43 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>
> wrote:
>
> I am using FIX 4.4.
>
> This is the execution report :
>
> *from App8=FIX.4.49=638735=834=249=TRADEWEB52=20131113-14
> <20131113-14>:10:18.25956=MITUFJTR347=UTF-86=0.713014=100000015=USD17=DB13DLRWDX00035122=I30=TRWB31=0.713032=100000037=NONREF38=100000039=248=[FpML]54=R55=[N/A]58=Single
> Dealer60=20131113-14:10:1864=2013111575=20131113107=IRS USD  3Y vs 3M
> LIBOR150=F151=0167=IRS198=DB13DLRWDX00035350=5755351 ….<FPML> … </FPML*
>
> *423=9460=12541=201611156731=20131113.DLRW.DSWP.3520212=Y20214=R453=4448=DLRWUS31447=B452=1448=UFJ
> Trust and
> Banking447=C452=3448=-A.Mishra at ny.tr.mufg.jp447=C452=11448=DTCC447=C452=1101907=11903=00000000SK87201311130000003500001904=01905=1010TWTEST1906=010=172
> <Banking447=C452=3448=-A.Mishra at ny.tr.mufg.jp447=C452=11448=DTCC447=C452=1101907=11903=00000000SK87201311130000003500001904=01905=1010TWTEST1906=010=172>*
>
>
>
> The field 1903 comes in the execution report.
>
> I did not add any field in the DD file as, in one of the previous replies
> you had mentioned that the DD file will be known to both the parties-- and
> as I am just extracting the fields from the execution report, do I have to
> modify the DD file?
>
>
>
> Thanks & Regards,
>
> Ashutosh Mishra
>
>
>
>
> *********************************************************************************
>
> This communication (including any attachments) is intended only or the use
> of the individual whom it is addressed and may contain information that is
> privileged, confidential or legally protected.  If the reader of this
> message is not the intended recipient, you are hereby notified that any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> us immediately by replying to the message.  Please also delete the message
> and its attachments, if any, from your computer and destroy any hard copies
> you may have created.  Thank you for your cooperation.
>
>
> *********************************************************************************
>
>
>
> *From:* quickfixn-bounces at lists.quickfixn.com [mailto:
> quickfixn-bounces at lists.quickfixn.com] *On Behalf Of *Grant Birchmeier
> *Sent:* Wednesday, November 13, 2013 10:21 AM
> *To:* Mailing list for QuickFIX/n
> *Subject:* Re: {{Quickfixn}} FW: Custom_Fields
>
>
>
> Not enough information.
>
>
>
> Which version of FIX?  Can you paste the full message (please make
> separators visible)?  Did you add this custom field to your DD xml file?
>
>
>
> -Grant
>
>
>
> On Wed, Nov 13, 2013 at 8:58 AM, Ashutosh Mishra <A.Mishra at ny.tr.mufg.jp>
> wrote:
>
> I posted this yesterday, but did not get any response -- so I am reposting
> it.
>
>
>
> I was trying to get the Unique Swap Identifier (Tad ID =1903), but it
> gives me an error -" Field with Tad ID = 1903 not found" -- *But it
> exists in the exection report.*
>
> I have used the following code in the Message Cracker (which is I got from
> QuickFix website):
>
>
>
> const int UniqueSwID = 1903;
>
> string uSID = message.GetString(UniqueSwID);
>
>
>
> Can you help me in this? If I will be able to find one field, I will be
> able to find others as well.
>
>
>
>
>
> Thanks & Regards,
>
> Ashutosh Mishra
>
>
>
>
> *********************************************************************************
>
> This communication (including any attachments) is intended only or the use
> of the individual whom it is addressed and may contain information that is
> privileged, confidential or legally protected.  If the reader of this
> message is not the intended recipient, you are hereby notified that any
> dissemination, distribution or copying of this communication is strictly
> prohibited. If you have received this communication in error, please notify
> us immediately by replying to the message.  Please also delete the message
> and its attachments, if any, from your computer and destroy any hard copies
> you may have created.  Thank you for your cooperation.
>
>
> *********************************************************************************
>
>
>
>
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>
>
>
>
> --
>
> Grant Birchmeier
>
> *Connamara Systems, LLC*
>
> *Made-To-Measure Trading Solutions.*
>
> Exactly what you need. No more. No less.
>
> http://connamara.com
>
>
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>
>
>
>
> --
>
> Grant Birchmeier
>
> *Connamara Systems, LLC*
>
> *Made-To-Measure Trading Solutions.*
>
> Exactly what you need. No more. No less.
>
> http://connamara.com
>
> _______________________________________________
> Quickfixn mailing list
> Quickfixn at lists.quickfixn.com
> http://lists.quickfixn.com/listinfo.cgi/quickfixn-quickfixn.com
>
>

-- 
Grant Birchmeier
*Connamara Systems, LLC*
*Made-To-Measure Trading Solutions.*
Exactly what you need. No more. No less.
http://connamara.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quickfixn.com/pipermail/quickfixn-quickfixn.com/attachments/20131113/aa7a9632/attachment-0002.htm>